7.3 Powerstroke Transmission Install: BD Diesel TowMaster Swap

Nov 20, 2026

How to install a BD Diesel TowMaster transmission in a 7.3 Powerstroke Ford F-350, start to finish, with Eric from Diesel Pro Mastery.

Just bought a BD transmission and getting ready to put it in yourself? Watch this first. This F-350 7.3 was flashing the overdrive light and going into limp mode from hot transmission fluid, only when towing a horse trailer with a lot of stop and go. Eric pulls the old transmission and installs a BD Diesel TowMaster, built for trucks that tow, along with BD’s remote transmission filter kit (bracket, filter, and lines).

The step most people skip: flush the transmission cooler and the lines before you hook up the new transmission. Eric flushes them in 1 direction, changes the fluid, then reverses it and flushes the other direction. Skip it and you void the warranty and put old debris right back into the new transmission.

Quick answers:
– Do you have to flush the transmission cooler and lines when installing a new transmission? Yes. Eric says it’s very important: if you don’t, you void the warranty, and the old debris goes back into the new transmission and causes a failure.
– How do you flush them? Hook up the flush machine, flush 1 direction, change the fluid, then reverse it and flush the other direction.
– Where do you mount the BD remote transmission filter on a 7.3 F-350? Beside the radiator, using the 2 bolts there. That’s where BD’s manual shows it.
– How do you route the lines? The line from the cooler goes into the filter, and the outlet line goes to the metal line that runs to the rear of the transmission, underneath the radiator.
– Do you need the zip ties in the kit? On this truck, no. There are clips that hold the hoses in place.
– Why a TowMaster? The owner tows a lot. Eric: “If you’re doing a lot of towing and you want dependability with a transmission, I recommend going with a BD transmission.”